Send emails automatically to new customers
Build one Mailsoftly automation that thanks every new customer, sends care tips a week later, asks for a review and sends one gentle reminder to people who did not click. Your team starts it by adding the customer to a list. Includes a video.
After every sale you mean to thank the customer, send a few tips a week later and, once they have settled in, ask for a review. On a busy week some of that never happens. In Mailsoftly one automation does it for every new customer: your team adds the customer to a list, and the emails go out on their own schedule.
The video follows one example: a bike shop whose customers say yes to emails at checkout. The steps below are the same job in writing, and they fit any shop or service business: a salon, a repair shop, a studio.
Send these emails only to customers who agreed to hear from you, for example with a checkbox at checkout.
## What you build One automation with this shape:
1. Trigger: Added to a list. Your list of new customers starts it. 2. Send Email: a thank you, right away. 3. Wait 7 days, then Send Email: care tips. 4. Wait 7 days, then Send Email: the review request, with one button. 5. Wait 3 days, then the condition Did the contact click a link? – Yes: Add tag, so your team knows who went to the review page. – No: Send Email, one gentle reminder.
Write the four emails first and save them under Templates, so you can pick them in the builder. Keep the review request to a single button: the condition counts a click on any tracked link in that email, so one link makes the answer clear. Unsubscribe and preference links are never counted.

Read the video transcript
Here's how to send emails automatically to new customers in Mailsoftly: a thank you, care tips and a review request, each one on time. The usual way: after every sale you mean to thank the customer, remember the tips a week later, and ask for a review. Then a busy week comes along.
Here's a better way, shown with a bike shop whose customers say yes to emails at checkout, so every email is one they agreed to. Summit Cycle Works starts in Automations. Click Create New Automation, and choose Start blank.
Name it New customer emails. The trigger decides who starts. Search for list, pick Added to a list, and choose New customers.
From now on, anyone your team adds to that list gets the emails. Run only once per contact stays on, so nobody gets the series twice. Apply.
First, the thank you. Click the first step and choose Send Email. Click Choose an email, and your saved emails show up as previews.
Use Thanks for riding with us, and type a subject. The sender is already filled in. A week later, care tips.
Click Add step, choose Wait, and pick 7 days. Then add another Send Email, use your bike care tips email, and give it its own subject line. Wait another 7 days, then ask for a review.
Add a third Send Email with the review request. It has a single button that opens your review page, so a click is a clear signal. Give them 3 days.
Then add a condition: Did the contact click a link? It checks the review request, the last email this automation sent. Clicks beat opens, because some mail apps open emails automatically.
The flow splits into Yes and No. On Yes, add an action, choose Add tag, and pick Review link clicked, so your team knows who went to leave a review. On No, send one gentle reminder with its own subject.
Save Changes, and here's the whole flow. Switch it on. Mailsoftly sums it up first: the list trigger, 4 emails, 9 steps, and each contact goes through once.
Activate. Now, after a sale, your team adds the customer. In Audience, your contacts open as a table you can edit like a spreadsheet.
Click Create Contact, type the name and email, and add them to New customers. Mailsoftly tells you saving starts New customer emails for this contact. Save, and Jordan is in.
A few weeks in, each step shows how many customers reached it. Click the count on the tag step to see who clicked the review button. The Contacts tab shows where every customer is.
The earliest ones are done, and Jordan is waiting out the first week before the care tips. Thank every new customer, on time, without the reminders. Free accounts run one automation at a time, once your account is verified.
Start free at mailsoftly.com.
Make the list
Go to Audience, open Contact Lists and create a list called New customers. Leave it empty for now. People who are already on the list when you switch the automation on do not start, so the list is for the customers you add from now on.

Start a blank automation and pick the trigger
Go to Automations, click Create New Automation and choose Start blank. Click the title, Untitled Automation, and name it, for example New customer emails.
Click the trigger card. In Search triggers type list, pick Added to a list, and in Select a contact list choose New customers. Leave Run only once per contact on, so nobody gets the series twice. Press Apply & Close.
Added to a list is different from Add a contact list. Add a contact list starts everyone on a list at once. Added to a list starts each person at the moment they join.

The thank you
Click the empty first step and choose Send Email. Click Choose an email, hover your thank you email and click Use template, then type the subject. The Sender is filled in for you: on a free account it is your connected Gmail or Outlook mailbox, on a paid plan with a verified domain it is your domain address. Press Apply & Close.

Care tips a week later
Press Add step, choose Wait, and click the 7 days preset (or type any number of days). Apply & Close. Press Add step again, choose Send Email and pick your care tips email with its own subject.

The review request
Add another Wait of 7 days, then a Send Email with the review request. Give the button a clear label such as Leave a quick review, and point it at your review page.

Check who clicked
Add a Wait of 3 days, so customers have time to read the email. Then press Add step, choose Add condition and pick Did the contact click a link? It checks the most recent email this automation sent, which is the review request. The flow now splits into a green Yes column and a red No column.
Why clicks and not opens: some mail apps open emails automatically, so an open does not prove a person read it. Clicks from link scanners are filtered out too.

Tag on Yes, remind on No
Under Yes, press Add an Action, choose Add tag and pick or create a tag such as Review link clicked. A click shows they went to the review page, not that they posted a review, so name the tag for what you know.
Under No, press Add an Action, choose Send Email and pick your gentle reminder. Keep it short and send it only once.
Press Save Changes in the bar at the bottom.

Switch it on
Flip the Draft switch at the top. Mailsoftly shows a summary first, Activate this automation?, with the trigger, the number of emails and steps (4 emails, 9 steps for this flow) and "Each contact enters this automation only once." Press Activate.
If it refuses, it tells you why: a step with a missing field, a trigger without a list, an account that is not verified yet, or a free plan that already runs another automation. Fix an automation that will not activate lists every message.

Add each new customer
After a sale, someone on your team adds the customer:
- One customer: go to Audience, Contacts and click Create Contact. Type the first name, last name and email, and in Add to lists choose New customers. Before you save, the window says "Saving starts "New customer emails" for this contact." If your emails use a merge field such as the first name, it also lists those fields so you can fill them in. Press Save.
- From the list: open the New customers list, click Add Contact and pick Create Contact or Choose from Contacts.
- From a form: a form that adds people to the list starts them too.
The Contacts page can also show your contacts as a table: switch to Table at the top of the list and click any cell to fix a name or add a tag, or paste from Excel or Google Sheets. The table edits contacts who already exist; to start this automation, add them to the list as above.
A bulk import does not start the automation for people who are new to your account, because they are created and put on the list in one go. After an import, add the imported people to the New customers list from the list page, or use the Add a contact list trigger for a one-time send.

See who is where
Open the automation. Each step shows how many customers reached it; click a count to see who passed, who is waiting there and who stopped. The Contacts tab has one card per customer with a progress bar: 14% after the thank you, 42% after the care tips, 71% after the review request, and 100% with a green Done chip when they finished. Customers in the Yes column also carry your tag, so you can filter the contacts by it.
## On the free plan Everything above works on a free account once it is verified: the list trigger, the waits, the click condition, Add tag and the Create Contact window. A free account runs one automation at a time and sends from your connected Gmail or Outlook mailbox. Sending from your own verified domain is part of the paid plans.

Frequently asked questions
How do I send emails automatically to new customers?
Create a list for new customers, then build an automation that starts with Added to a list on that list. Add a Send Email for the thank you, Waits between the emails, and switch it on. From then on, every customer your team adds to the list gets the series on schedule.
How do I send a series of emails automatically?
Put Send Email steps one after another with a Wait between them. Each Wait holds the customer for the days you set, then the next email goes out. The Contacts tab shows where each person is in the series.
Can I ask for a review only once and remind people who did not respond?
Yes. After the review request, add a Wait and the condition Did the contact click a link? Put Add tag under Yes and a single reminder email under No. Customers who clicked never get the reminder.
Does adding a customer in the contacts table start the automation?
Not by itself. The table edits names, emails, fields and tags of contacts who already exist. Add the customer to the New customers list, for example with Create Contact and Add to lists, and the automation starts.
What happens if I add the same customer twice?
With Run only once per contact on, each email address goes through the series once. Adding them again later does not start a second run.
Can I do this for free?
Yes, once your account is verified. A free account runs one automation at a time and sends from your connected Gmail or Outlook mailbox.
Ready to try it in your own account?
Free to start with your Google Workspace or Microsoft 365 account. No credit card required.